Initial U.S. manufacturer-source matrix. Last checked November 20, 2026. This is a documentary reference, not an electrical compatibility certificate.
A power station and a home panel must be checked as a specific combination. The rows below record what the manufacturers document, including limitations that can be easy to miss in a product title or bundle selector.
| Power station / panel or switch | Documented configuration | Important limitation or note | Evidence status |
|---|---|---|---|
| EcoFlow DELTA Pro Ultra + Smart Home Panel 2 | Owner manual documents up to 3 DELTA Pro Ultra inverters | Use the exact Power Input/Output cable and manual configuration. EcoFlow’s circuit count and available inverter output remain separate limits. | Documented by manufacturer |
| EcoFlow DELTA Pro Ultra + 1 or 2 sets of original DELTA Pro + Smart Home Panel 2 | Owner manual’s charging/discharging table documents both charging and discharging for this combined configuration | This is a supported combination in the checked manual. Its L1/L2 supply behaviour is not identical for the Ultra and original DELTA Pro; check the diagrams and connection instructions. | Documented by manufacturer |
| EcoFlow DELTA Pro 3 + Smart Home Panel 2 | Owner manual documents up to 3 DELTA Pro 3 units | All AC input and output sockets on the DELTA Pro 3 are disabled when connected through the panel’s AC power input/output port. The checked manual does not support mixing DELTA Pro 3 with DELTA Pro or DELTA Pro Ultra. | Documented, with restrictions |
| One original EcoFlow DELTA Pro set + Smart Home Panel 2 | Manual’s table shows charging: yes; discharging: no for this standalone configuration | Do not assume one original DELTA Pro set can discharge to backup loads through the panel by itself. The manual separately documents a supported combination when DELTA Pro Ultra is also connected. | Documented limitation for standalone setup |
| Two original EcoFlow DELTA Pro sets + Double Voltage Hub + Smart Home Panel 2 | Manual’s table shows charging and discharging: yes | Requires two sets and the specified Double Voltage Hub. | Documented by manufacturer |
| Anker SOLIX F3800 Plus + Home Power Panel | Anker offers single- and dual-F3800 Plus Smart Home Power Kit configurations | Home Power Panel supports 120/240 V split-phase systems only; Anker states it does not support 120/208 V systems. | Documented, service-type restriction |
| Anker F3800 Series + 10-circuit manual transfer-switch selector | Anker’s U.S. listing has selectable variants including “For F3800 or 2× F3800 Plus,” “Not Suitable for Single F3800 Plus,” and “For F3800 Plus or 2× F3000” | One 50 A option is expressly marked not suitable for a single F3800 Plus. Verify the exact selected variant, its amp rating, model support and included cable; the product-page title does not describe every option. | Documented selector limitation |
Read the complete notes before buying
- EcoFlow Smart Home Panel 2: supported DELTA combinations and restrictions
- EcoFlow Smart Home Panel 2 vs Anker Home Power Panel: what to check
- Try the Home Backup System Finder
- Anker F3800 Plus: how to interpret the 10-circuit transfer-switch variants
- Home backup integration: panels, transfer switches and circuit requirements
- How we check compatibility and evidence
Official source documents
- EcoFlow Smart Home Panel 2 owner manual.
- EcoFlow U.S. Smart Home Panel FAQ.
- Anker SOLIX Smart Home Power Kit and Home Power Panel.
- Anker U.S. 10-circuit manual transfer-switch listing.
We will expand this matrix only when the exact model, region, accessory and source can be identified. “Not found” or “not stated” does not mean a product is incompatible; it means the source evidence is insufficient. Manufacturer documentation can change, so always re-check the latest manual and product page.
Any connection to household wiring, transfer equipment or hardwired circuits must be assessed and installed by a qualified electrician. This matrix is not a design or approval for an installation.
Installed residential battery systems
This matrix is limited to portable EcoFlow and Anker products. It does not cover fixed home battery installations or smart electrical panels. For those systems, see the separate SPAN Panel battery compatibility matrix and 120/208 V vs 120/240 V home battery guide.