U.S. manufacturer-source checker. Research status: reviewed November 20, 2026. This tool checks whether selected battery-system and SPAN Panel combinations appear in SPAN’s published support table. It does not certify that an installation is suitable for a particular property.
SPAN compatibility is specific to the panel model, battery generation and supporting gateway, controller or accessory. Service voltage must be checked separately: SPAN states that its Panel requires 120/240 V split-phase AC service. Tool scope: this checker only evaluates the exact choices currently available in its selectors. If your battery model, panel generation, gateway or accessory is not listed as an exact option, the checker does not assess that configuration. Use the full SPAN compatibility matrix and the current manufacturer documentation instead of treating a similar product-family name as equivalent. Current chart note: SPAN lists FranklinWH aPower 1 and aPower 2 with the named aGate generations; its current compatibility chart does not list aPower S for any SPAN Panel model.
Source clarification: SPAN’s linked generator article is cited specifically because it states that SPAN Panel requires 120/240 V split-phase AC service. It is not evidence that a portable generator can be connected directly to SPAN or that every generator arrangement is supported; SPAN documents important upstream transfer-switch limitations.
SPAN compatibility research tool
Check a SPAN Panel + battery pairing
Choose the exact SPAN Panel model, battery family, supporting equipment and electrical service. The result checks only whether the combination appears in SPAN’s published compatibility guidance.
Research result
Important limitation: This checker reports whether a pairing is listed in SPAN’s published support information. It does not verify a home’s wiring, service equipment, load calculations, permits, utility requirements, firmware, product revisions or the manufacturer’s latest installation approval. A listed pairing is not an electrical certification, design or guarantee.
SPAN says compatible battery integrations require wired Ethernet communications for Tesla, SolarEdge and FranklinWH, or the SPAN Remote Meter Kit for Enphase. SPAN-authorized installers are required for Powerwall 3, Enphase and FranklinWH installations, subject to the FranklinWH technician option described by SPAN.
Never open electrical equipment, work on live wiring or attempt to connect a battery to a household panel based on this tool. Have a licensed electrician and the relevant manufacturer-authorized installer confirm the complete system.
How to interpret the result
- Documented SPAN-listed pairing: the selected models and accessories appear in SPAN’s published compatibility information. This is not installation approval.
- Documented limitation: the selected service type or supporting hardware does not match the published requirements, or the combination is not listed for that SPAN Panel model.
- Not enough information: an exact model, accessory, communication requirement or property service detail is unknown.
Read the full compatibility notes
Use the SPAN Panel battery compatibility matrix for the complete model-by-model table, source discrepancies and required accessories. Read our 120/208 V vs 120/240 V guide before treating a product’s voltage rating as proof that it suits a property’s electrical service.
Safety and scope
Battery storage and electrical-panel integration require professional design, permitting and installation. A result on this page is not an electrical certification, load calculation, wiring diagram, utility approval or guarantee. Have a licensed electrician and the relevant manufacturer-authorized installer confirm the exact system, service, backup equipment, circuits and local requirements. Never work on live wiring or attempt to connect a battery to a household panel based on this tool.