PAIRVOLT · RESEARCH LIBRARY

SPAN Panel Battery Compatibility Matrix: Tesla, Enphase, SolarEdge & FranklinWH

Initial U.S. manufacturer-source matrix. Last checked November 20, 2026. This page records which battery systems SPAN currently documents as compatible with each SPAN Panel model. It is not an installation plan, electrical certification or approval for a particular property.

SPAN panel compatibility is model-specific. A system that works with SPAN Panel MAIN 32 is not automatically supported by SPAN Panel MAIN 16, MAIN 40, MLO 24 or MLO 48. Battery controller, gateway, backup switch, communications and accessories matter.

Want to check one configuration? Use our SPAN Battery Compatibility Checker to compare the selected panel, battery family, supporting hardware and service type with SPAN’s published compatibility table. The result is a paper check, not installation approval.

Compatibility by SPAN Panel model

SPAN Panel modelBattery systems listed by SPANRequired supporting hardware / conditions
SPAN Panel MAIN 32Tesla Powerwall 2, Powerwall 3 and Powerwall+; SolarEdge Home Hub with Home Backup Interface and SolarEdge Home Battery; Enphase IQ 3, 3T, 10, 10T and IQ 5P; FranklinWH aPower 1 and aPower 2Tesla: Powerwall 2 with Backup Gateway 1 or 2; Powerwall 3 with Backup Switch, Backup Gateway 2 or 3; Powerwall+ with Backup Switch or Backup Gateway 2. SolarEdge: up to 2 Energy Hub inverters. Enphase: IQ System Controller 1 or 2 for IQ 3/3T/10/10T; IQ System Controller 3 for IQ 5P, plus SPAN Remote Meter Kit. FranklinWH: aGate or aGate v1.3.
SPAN Panel MAIN 16, MAIN 40, MLO 24 and MLO 48Tesla Powerwall 3; FranklinWH aPower 1 and aPower 2Tesla Powerwall 3: Backup Switch, Backup Gateway 2 or Backup Gateway 3. FranklinWH: aGate or aGate v1.3. The current SPAN chart does not list Powerwall 2, Powerwall+ or Enphase for these panel models.

How to read the table: SPAN states that a storage system not included in the compatibility chart is not currently compatible with that SPAN Panel model. This distinction is model-specific: a battery listed for MAIN 32 is not automatically listed for MAIN 16, MAIN 40, MLO 24 or MLO 48. SPAN’s current compatibility chart does not list FranklinWH aPower S for any of the SPAN Panel models shown here. SPAN states that systems omitted from its chart are not currently compatible.

SolarEdge limit: SPAN’s current support chart states that MAIN 32 can be paired with up to 2 Energy Hub inverters. We use that current support requirement rather than older or conflicting secondary descriptions. Confirm the exact inverter and battery configuration with SPAN and the installer before purchase.

Model-specific update: SPAN’s current chart lists FranklinWH aPower 1 and aPower 2 with MAIN 32 and with MAIN 16, MAIN 40, MLO 24 and MLO 48, using aGate or aGate v1.3. It does not currently list aPower S for any SPAN Panel model. Do not infer compatibility from a shared product family name; match the exact battery model and aGate generation against SPAN’s current chart.

Tesla model update: SPAN’s current support chart lists Powerwall 2 and Powerwall+ alongside Powerwall 3 for MAIN 32, with different Backup Gateway or Backup Switch requirements for each. For MAIN 16, MAIN 40, MLO 24 and MLO 48, the chart lists Powerwall 3 only. Do not apply the MAIN 32 Tesla combinations to other SPAN panel models.

Accessories and communications can change the answer

  • Tesla: The backup hardware differs by battery generation. SPAN lists Backup Gateway 1 or 2 for Powerwall 2; Backup Switch, Backup Gateway 2 or 3 for Powerwall 3; and Backup Switch or Backup Gateway 2 for Powerwall+. Powerwall 2 and Powerwall+ are listed only with MAIN 32 in the current chart.
  • Enphase: MAIN 32 only in the current chart. IQ 3, 3T, 10 and 10T use IQ System Controller 1 or 2; IQ 5P uses IQ System Controller 3. SPAN Remote Meter Kit is required.
  • FranklinWH: SPAN’s current chart lists aPower 1 and aPower 2 for all panel models shown, with aGate or aGate v1.3. It does not currently list aPower S. Confirm the exact gateway and system instructions.
  • SolarEdge: MAIN 32 lists Home Hub with Home Backup Interface and SolarEdge Home Battery, with up to 2 Energy Hub inverters.
  • Communications and commissioning: SPAN requires wired Ethernet communication for Tesla, SolarEdge and FranklinWH, or the SPAN Remote Meter Kit for Enphase. SPAN says authorized installers are required for Powerwall 3, Enphase and FranklinWH integrations; FranklinWH can also use an onsite Franklin technician with the required installer apps. SolarEdge and Tesla Powerwall 2/Powerwall+ can be virtually added by SPAN Support when the installer is not SPAN-authorized, subject to SPAN’s information requirements. Confirm the current process before scheduling work.

Panel compatibility is not the same as service-voltage compatibility

A battery system appearing in SPAN’s compatibility table does not, by itself, establish that the complete system supports a property’s electrical service. SPAN separately states that its Panel requires 120/240 V split-phase AC service; a battery or inverter specification that mentions 120/208 V does not override this SPAN Panel requirement. Check the battery/inverter and gateway documentation separately for the exact service voltage and phase. For example, FranklinWH’s published aGate and aPower 2 specifications list both 120/240 V and 120/208 V single-phase service options. Anker states that its Home Power Panel supports 120/240 V split-phase only and does not support 120/208 V. Do not assume the same service limits apply to every battery brand or panel.

See our separate 120/208 V vs 120/240 V home battery compatibility guide and our research methodology for how we keep these checks separate.

What to verify before selecting equipment

  • Exact SPAN panel model and hardware revision.
  • Exact battery model, inverter, gateway/controller and supported firmware where the manufacturer specifies it.
  • Required Remote Meter Kit, Ethernet communications, Backup Gateway, Backup Switch, Home Backup Interface or other named accessory.
  • Property service voltage and phase, confirmed by a licensed electrician.
  • Manufacturer installation requirements, circuit limits, backup load arrangement, local permits and utility requirements.

SPAN panel and battery integration requires professional assessment and installation. This matrix is a research aid only; it is not engineering, a wiring diagram, a compatibility certificate, a load calculation, an installation approval or a warranty of performance. Use a SPAN-authorized installer and the battery manufacturer’s qualified installation partner as required. Never work on live electrical equipment or improvise a connection to a household panel.

Official source documents